Manuels Connexes pour HP color LaserJet 5500
Sommaire des Matières pour HP color LaserJet 5500
- Page 1 LaserJet 5500, 5500n 5500dn, 5500dtn, 5500hdn start démarrage start inicio início lea esto primero...
- Page 2 Any changes or modifications to the printer that are not expressly PARTICULAR PURPOSE. approved by HP could void the user’s authority to operate this equipment. Hewlett-Packard shall not be liable for any direct, indirect, incidental, Use of a shielded interface cable is required to comply with the Class B consequential, or other damage alleged in connection with the furnishing limits of Part 15 of FCC rules.
- Page 3 96 MB of SDRAM. a printer stand, and a total of 160 MB of SDRAM. • HP Color LaserJet 5500n: includes the features of 5500, plus a HP Jetdirect 615N print server EIO network card. • HP Color LaserJet 5500dn: includes the features of 5500n, plus automatic 2-sided printing.
- Page 4 5500dtn, a third 500-sheet paper feeder, surface. Locate in a well-ventilated area. plus a hard disk. • HP Color LaserJet 5500hdn : inclut les fonctions Choix de l’emplacement. Choisissez une surface du modèle 5500dtn, un troisième bac à papier plane et robuste.
- Page 5 Regulate the environment. Do not place in direct Unpack the printer. Cut the tape to open the box. sunlight. Ensure the environment is free from abrupt Do not cut the strapping loops. temperature or humidity changes. • Temperature—15° to 27° C (56° to 80° F). •...
- Page 6 Open the flaps and disconnect the strapping loops. Lift the box off and set it aside. Ouvrez les volets et détachez les sangles. Soulevez le carton et placez-le de côté. Abra las solapas y afloje las presillas. Levante la caja y déjela a un lado. Abra as abas e solte as alças de fixação.
- Page 7 Locate the two connecting tabs on the bottom. Bend the Lift the inner sleeve up and off of the printer. tabs out and down. Remove the two top cushion rails. Repérez les deux onglets de connexion situés en bas. Soulevez la chemise intérieure afin de dégager Recourbez les onglets vers l’extérieur et vers le bas.
- Page 8 Remove the accessory box. Slide the top sections of Package contents. 1) HP Color LaserJet 5500 series each packing cushion off. printer. 2) Print cartridges. 3) Software and electronic documentation. 4) Printed documentation. 5) Power cord. Retirez le carton à accessoires. Faites glisser les Contenu du carton.
- Page 9 Optional package contents: 6) Optional Install the stand and optional 500-sheet 500-sheet paper feeder (Tray 3). 7) Overlays. paper feeder: Remove the 500-sheet paper feeder 8) Parallel cable. 9) Printer stand. 10) Attachment and the printer stand from their boxes and remove the screws.
- Page 10 Place the printer stand in the prepared location. Remove trays: Remove the trays from the printer and CAUTION: The prepared location must be level, 500-sheet paper feeders and set them aside. sturdy, and must support all four corners of the printer stand.
- Page 11 Remove the packing material from the trays. Use the guide pins on the printer stand to align the 500-sheet paper feeder as you lower it onto the printer stand. Retirez le matériel d’emballage des bacs. Utilisez les broches-guides sur la base de l’imprimante pour aligner le bac à...
- Page 12 If you are installing another 500-sheet paper feeder, Note: If you already have one optional 500-sheet align the second paper feeder with the guide pins on paper feeder and you are adding a second one, you the first paper feeder. will need to unplug the printer and detach the printer from the first 500-sheet paper feeder to install the second one.
- Page 13 WARNING! If the printer is already set up, turn the Set up the printer: It takes four people to lift and printer off and unplug the power cord from both the move the printer. Grip the printer at the four corners printer and the power outlet.
- Page 14 Use the guide pins on the 500-sheet paper feeder to Gently lower the printer onto the 500-sheet paper align the printer as you lower it onto the paper feeder. feeder. CAUTION: Avoid bending the guide pins while lowering the printer. Utilisez les broches-guides sur le bac à...
- Page 15 Use caution when stacking the 500-sheet paper feeders Secure the units: Insert an attachment screw into and the printer. Avoid tipping. each of the four alignment holes. Using your fingers or a coin, tighten the screws to attach the printer to the 500-sheet paper feeder.
- Page 16 Install paper trays: Adjust the rear guide by Slide the side guides to the desired size. squeezing the guide adjustment latch and sliding the back of the tray to the size of the paper being loaded. Installation des bacs à papier : Ajustez le guide Faites glisser les guides latéraux sur le format souhaité.
- Page 17 Load paper face-up. Load up to 500 sheets of Insert the trays into the printer and the 500-sheet paper 75 g/m (20 lb) stock in the 500-sheet feeder trays. feeder. Capacity may vary with other paper types. Chargez le papier face vers le haut. Chargez Introduisez les bacs dans l’imprimante et le bac jusqu’à...
- Page 18 Locate the printer parts: Front 1) Control panel. Rear 1) 250-sheet output bin. 2) On/off switch. 2) Top cover. 3) Front cover (access to Tray 1). 3) Optional 500-sheet paper feeder. 4) EIO port (total 4) 500-sheet input tray (Tray 2). 5) 250-sheet output of 3).
- Page 19 Using the side handles, open the top cover. Install a new overlay (optional): Position the Remove the orange packing tape from the printer. new overlay over the top of the control panel. Remove the orange shipping locks (5500, 5500n, 1) Insert the left tab of the overlay into the slot on the 5500dn only).
- Page 20 Connect Power. Using the control panel menus: 1) Press 1) Plug the AC power cord into the printer and into the to scroll through menus. 2) Press to select an item. power outlet. 2) Turn the printer on. 3) Press to go back to the previous menu.
- Page 21 Change display language (optional): The control panel displays LANGUAGE= in English. If the control panel displays LANGUAGE= in English, go 1) Press until the preferred language appears. to the next column. Otherwise, turn the printer off and 2) Press to save the preferred language. then back on.
-
Page 22: Installation Des Cartouches D'impression
Install print cartridges: 2) Grasp the top edge of the front cover and pull to After a short while, the control panel displays INSTALL open the front cover. SUPPLIES. 1) Using the side handles, open the top cover. Installation des cartouches d’impression : 2) Saisissez le bord supérieur du couvercle avant et Après un bref moment, le panneau de commande doit tirez pour ouvrir ce dernier. - Page 23 3) Grasp the green handles on either side of the 4) Remove the print cartridge from the plastic bag. transfer unit and pull down. CAUTION: Do not place 5) Grasp both sides of the cartridge and distribute the anything on the transfer unit while it is open. toner by gently rocking the cartridge from side to side.
- Page 24 6) Remove the orange shipping tape. Remove and 7) Remove the inside sealing tape by pulling the discard the orange shipping locks. orange loop on the end of the cartridge and pulling the tape completely out. Discard tape. 6) Retirez la bande d’expédition orange. Retirez les 7) Retirez la bande d’étanchéité...
- Page 25 8) Grasp the blue handles on the sides of the print 9) Using the green handles on either side of the transfer cartridge. Insert the print cartridges in the position unit, close the transfer unit. shown (C = cyan, Y = yellow, M = magenta, K = black).
- Page 26 10) Close the front cover. 11) Close the top cover. 10) Fermez le couvercle avant. 11) Fermez le couvercle supérieur. 10) Cierre la cubierta frontal. 11) Cierre la cubierta superior. 10) Feche a tampa frontal. 11) Feche a tampa superior.
- Page 27 INFORMATION After a short while, the control panel should display Print a configuration page to ensure that the printer is working properly. Press . Press until READY. INFORMATION appears. Press . Press until PRINT CONFIGURATION appears. Press to print the page. If the configuration page does not print, consult the CD User Guide.
-
Page 28: Connexions
On the configuration page, verify that the installed tray Connections: appears in the list of Paper Trays and Options. Direct to network. Connect one end of the network cable to the RJ-45 port. Connect the other end to the network. Sur la page de configuration, vérifiez que le Connexions : bac installé... - Page 29 Network print server. Connect one end of a Peer to peer (direct to network). Connect one network cable into the server. Connect the other end to end of a network cable to your computer. Connect the the network. Connect one end of another network other end to the network.
- Page 30 Peer to peer (parallel). Connect two or more Parallel connection. Connect the parallel cable to computers to the network hub using network cables. the proper port on the printer. Connect the other end of Connect one end of a parallel cable to the printer. the cable to the computer.
- Page 31 Install the printer software. Place the compact Windows. If the CD browser starts automatically, disc shipped with the printer in the CD-ROM drive on select Install Printer. Otherwise, click Start then the computer. Run. Type X:\SETUP, where x represents the letter of the CD-ROM drive.
- Page 32 Macintosh. Run the LaserJet installer. Or, from On all computers that print to the printer, configure the the Chooser, select the HP Color LaserJet 5500 printer drivers to show that the 500-sheet paper feeder printer. is installed. Macintosh. Exécutez le programme d’installation Sur tous les ordinateurs qui impriment vers LaserJet.
- Page 35 INFORMATION...
- Page 47 940 mm (37 inches) 1090 mm (43 inches) 627.50 mm (25 inches)
- Page 48 © 2002 Hewlett-Packard Company www.hp.com *C9656-90940* *C9656-90940* C9656-90940...