Connecting A Tv Using An Hdmi Cable - Samsung HW-T550 Manuel Complet

Connecting a TV using an HDMI Cable

1. With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure.
2. "TV ARC" appears in the display window of the Soundbar main unit and the Soundbar plays TV
sound.
• If TV sound is inaudible, press the
the Soundbar to switch to "D.IN" mode. The screen displays "D.IN" and "TV ARC" in sequence,
and TV sound is played.
• If "TV ARC" does not appear in the display window of the Soundbar main unit, confirm that the
HDMI cable (not supplied) is connected to the correct port.
• Use the volume buttons on the TV's remote control to change the volume on the Soundbar.
NOTES
• HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
• If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one
whose diameter is less than 0.55 inches (14 mm).
• This function is not available if the HDMI cable does not support ARC.
Connect to the HDMI IN
(ARC) port of your TV.
HDMI IN
(ARC)
Connect to the HDMI TO TV (ARC) port
of the Soundbar main unit.
Top of the Soundbar

HDMI Cable
(not supplied)

TV ARC
(Source) button on the remote control or on the top of
ENG - 11
Bottom of the Soundbar
HDMI TO TV
(ARC)