Mounting And Securing The Neutral Furniture Top (Genesi / Sintesi) - steel ZS0389 Manuel D'installation

Instructions for the installer
3.9

Mounting and securing the neutral furniture top (Genesi / Sintesi)

Loosen the three screws C in the top;
•
screw down the two brackets A, one for each side, into the base of the top by means of screws
•
D (see box 1);
lift up the top and gently lay it down on the neutral item of furniture, making sure that the upper
•
dowels B, one on each side (as shown in the figure in box 2), perfectly fit into the
corresponding holes beneath the top in the front;
align the top with the neutral item of furniture (as shown in the figure in box 3);
•
tighten the three screws C back into the top. Also tighten down the two screws E to firmly join
•
the top to the neutral item of furniture.
29