Safety Messages - Avaya 4000 Serie Manuel D'installation

Before You Begin
Figure 1: Connecting the AC power cord to the Ethernet Routing Switch 4000 Series
Connect the AC power cord to the back of the switch, and then connect the cord to a power
outlet.

Safety messages

Warning:
Installation must be performed by qualified service personnel only. Read and follow all
warning notices and instructions marked on the product or included in the documentation.
Voltage:
This equipment relies on the building's installation for overcurrent protection. Ensure that a
fuse or circuit breaker no larger than 120 VAC, 15 A U.S. (240 VAC, 16 A International) is
used on the phase conductors.
Caution:
This device is a Class A product. In a domestic environment, this device can cause radio
interference, in which case the user may be required to take appropriate measures.
Caution:
When mounting this device in a rack, do not stack units directly on top of one another in the
rack. Each unit must be secured to the rack with appropriate mounting brackets. Mounting
brackets are not designed to support multiple units.
24 Avaya Ethernet Routing Switch 4000 Series Regulatory Information
Comments? infodev@avaya.com
June 2012