Care & Maintenance; Disposal - Pattfield PE-1200 Mode D'emploi

Care & Maintenance
Caution! Make sure the tool is
switched off and unplugged.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the mo-
tor and around the on/off switch. Use a soft
brush to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
- Add sufficient grease in the grease box, if
hammer work efficiency is too low.
Caution! If the supply cord is dam-
aged, it must be replaced by the
manufacturer or its service agent or simi-
larly qualified person in order to avoid haz-
ard.

Disposal

The crossed-out wheeled bin logo
requires the separate collection of
waste electric and electronic equip-
ment (WEEE). Such equipment may
contain dangerous and hazardous substanc-
es. These tools must be returned to a desig-
nated collection point for the recycling of
WEEE and must not be disposed as unsorted
municipal waste. By doing so, you will help to
conserve resources and protect the environ-
ment. Contact your local authorities for more
information.
Children must not play with plastic bags and
packaging material, due to possible injury or
danger of suffocation. Store such material
safely or dispose of environmentally friendly.
DE 89