Package Contents; Rear View With Connections - Grundig GML-2010E Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Do not overload wall outlets and extension cords as this can result in a risk of fire or
electric shock.
Ensure that the total ampere rating of all units plugged into the extension cord is not
over the cord's rating.
If the power supply cord, that came with your monitor, is to be connected to the PC
instead of the wall outlet, this equipment is to be used with UL/TUV approved
computers with receptacle rated 100-240 V AC, 50/60 Hz, 2.0 A (minimum).
Check the monitor specification carefully. This GRUNDIG monitor has a 1920 x 1080
resolution and works with both PAL and NTSC signal modes. This GRUNDIG monitor is
for 24/7 security purposes; therefore, the environmental specifications such as the
operating temperature and the voltage needed have to be maintained at all times.

3. Package Contents

These parts are included:
- LED Monitor
- Power Cord
- HDMI Connector Cable
- Owner's Manual

4. Rear View with Connections

AC: Connect the power cord that is included in the package.
Audio: Please use the 3.5 mm jack to transmit audio signals for VGA mode.
VGA: Connect the monitor with the VGA cable that is included in the package.
HDMI (High Definition Multimedia Input): Here you can connect a monitor with a HDMI
cable (the cable is not included in the package).
NOTE: HDMI includes not only the image transfer but also the ability to transmit audio.
English
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gml-2210e

Table des Matières