Turning The Monitor Off/On; Osd Control Keys; Osd Menu Configurations - Grundig GML-2010E Manuel D'utilisation

5. Turning the Monitor Off/On

PLEASE NOTE:
After pressing the "Power" button, it will take approximately 6 sec. until the monitor is
ready and the display is visible.
These are the various power states of the LED monitor represented by the different LED
colours on the POWER button:
BLUE: On
BLUE light flashing: No signal input
BLANK: Off or No power supply

6. OSD Control Keys

7. OSD Menu Configurations

- Press the "MENU" button to see the menu.
- Press "UP/DOWN (/\ / \/)" to switch between the menus.
- After having selected a menu, press "MENU" to select a menu item. Press "UP/DOWN
(/\ / \/)" to adjust the settings of this item.
- To go to another menu, press the "EXIT" button again and go with the "UP/DOWN (/\ /
\/)" buttons to the desired menu. Press "MENU" again to select a menu item and press
"UP/DOWN (/\ / \/)" to adjust the settings of this item.
4 English