Chauvet DJ EVE P-140 VW Guide De Référence Rapide page 3

AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of EVE P-140 VW products that you can power link at each voltage, see the User Manual or
the sticker on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Mounting Clamp
(such as CLP-15 from Chauvet)
Safety Cable
(such as CH-05
from Chauvet)
EVE P-140 VW QRG Rev. 3
QUICK REFERENCE GUIDE
Safety Notes.
Mounting Bracket
Bracket Adjustment Knob
EN
2