Preparations prior to use
1. Remove all packing assemblies such as case fixing tape etc., especially the
foam base.
2. Use warm wet cloth to clean both interior and exterior of the refrigerator, (neutral
detergent can be added in warm water).
3. After leveling and cleaning the refrigerator, stand it for about 2 hours before
plugging the power plug for powering on, and cool the refrigerator for 2 to 3 hours
before storing foods.
Operation keys
Temperature regulation
--The temperature inside the refrigerator is
controlled by the temperature controller mounted
in the refrigerating chamber, which is provided
with 8 gears (0, 1,2,......7). Temperature controller
lighting combination panel -- The temperature
inside the refrigerator decreases gradually when
the temperature control knob is turned from 0 → 7;
conversely, the temperature increases gradually;
--The use may set the temperature control knob at
different gears on the basis of refrigerator service
environment and specific situations of stored
foods;
--The temperature inside the refrigerator will vary
as the temperature control knob is placed at
different gears, and meanwhile the power
consumption will show some differences;
--Upon overall consideration of preservation
effect and power consumption, the recommended
regulated values are as follows:
4~6 gears in summer, 4 gear in spring and autumn
and 2~4 gears in winter.
Temperature controller lighting
combination panel
7
EN