ACME FlyCamOne2 V2 Manuel D'utilisation page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

FlyCamOne²
Photo [
]
The recording takes place with 640x480 px, one photo needs approx. 100 KB storage on the SD-card.
The FlyCamOne² indicates the recording with a frame„
".
Photo endless [
]
With an interval of 4 seconds the FlyCamOne² takes pictures.
The recording will be stopped by pressing the shutter button [2], or when the SD-card is full.
Spy video [
]
EL modo soplón permite realizar grabaciones escondidas. La grabación va a ser activada hasta que algo o alguien se encuentran delante de la
cámara. Una vez la tarjeta llena, la grabación va a pajar.
Spy –video endless [
]
Recording as above – however the free storage (min. 200MB) of the SD-card is shared and the old part will be overwritten consecutively. The
recording will be stopped not until the shutter button [2] gets pressed.
Audio recording [
]
Records audio only.
Download and coevally charging [
]
Connection to the PC in drive mode. FlyCamOne² will be charged coevally when connected – charging will take approximately 3 hours.
Web Cam [
]
Connection to the PC in web cam mode. Download the driver at first at www.FlyCamOne.com.
Status of the battery
Battery power is displayed in percent as following:
,
,
and
for charge.
180° turned recording
Pressing the shutter button for 3 seconds after "CC" is displayed, the following modes are displayed turned by 180°. Recording is now upside down.
Time stamp [
/
]
The FlyCamOne² V2 has an integrated calendar now. This will allow to add the time and date into the recorded video. Press the menu button (3) for
10 seconds. Indicated by
it will enable the date and time. Press again ,indicated by
, it will be disabled. To update the calendar write a text file
named clock.txt to your SD card using windows editor (Programs -> Accessories) where you put the date and time into the first line. According to this
format: „YYYY-MM-DD HH-MM-SS" Ex.:„2009-12-01 17-30-00". Put the card into the cam and switch on the cam. The Cam will take the settings
from the card, the file clock.txt will be deleted. It is also possible to synchronize the cam with your PC: download RTCRW.exe from our website.
Follow the instruction of the readme file!
Memory voll [
]
Records can´t be made until data from the SD-card will be deleted.

Publicité

Table des Matières
loading

Table des Matières