Dutch originals DO-SV-BTSB5-B Manuel Utilisateur page 8

A. Stand mounting (vertical)
Place the device on the stand and turn it counter-clockwise until it is solidly attached
to the stand.
Connect the cables of the stand with each other.
B. If your TV is placed on a table or TV stand, you can place the device on it directly
in front of the TV, centred with the TV screen.
To avoid and absorb vibrations, install the rubber feet supplied under the device.
To install the rubber foot:
Note: Ensure the surface is clean prior to sticking the rubber foot to the bottom of the
device.
1. Turn the device upside down.
2. Remove the backing paper from the rubber foot.
3. Stick the rubber foot to the bottom of the device as shown in the illustration below.
Note: The device will increase a bit in height due to the placement of the foot.
EN 06