Setting The Time/Date; Setting The Fan - Honeywell Home Smart Serie Mode D'emploi

Setting the time/date

1 Touch the current time. The screen
displays Set Time/Set Date.
2 Touch Set Time or Set Date.
3 Touch p or q until the proper time/date is
displayed.
4 Touch Done to save or Cancel to ignore
changes.
Note: This thermostat will automatically
update for daylight saving time (if observed
in your area) and all date/time information is
stored. If the thermostat is connected to Wi-Fi
and registered to Total Connect Comfort, the
current time is updated from the internet.

Setting the fan

1 Touch FAN to display fan settings.
2 Touch On, Automatic, Circulate, or Follow
Schedule.
3 Note: Follow Schedule option only appears if
the fan is set for On or Circulate for one or
more program periods.Touch Done to save
and exit.
On: Fan is always on.
Automatic: Fan runs only when the heating or cooling system is on.
Circulate: Fan runs randomly about 35% of the time (home use
only).
Follow Schedule: Follow Schedule is not an option if all programs
are set to fan auto (see pages 16 -18).
Note: Touch On, Automatic, or Circulate to temporarily override the
programmed fan schedule.
12:12 am
Done
15
FAN
69-2715EF—07
Done