Ce Declaration Of Conformity - Telcoma Automations ZEN 100E Guide

GB
OVERALL LAYOUT (fig. 1)
1) Gearmotor
2) Z124 control unit + OC2 receiver
3) Transmission guides
4) Guide supports + brackets
5) Transmission arm
The manufacturer: Telcoma srl
via L. Manzoni, 11 - 31015 - Z.I. Campidui Conegliano (TV) - ITALY
DECLARES that the products: GEARMOTOR ZEN 60E and GEARMOTOR ZEN 100E
comply with the following EC directives:
-EMC Directive 2004/108/CE with reference to the following standards:
EN 55014-1;
EN 55014-2;
EN 55022;
EN 301 489-3;
EN 61000-3-2;
EN 61000-3-3;
-Low Voltage Directive (LVD) 2006/95/EC with reference to the following standards:
EN 60335-1;
-Directive 98/37 EEC (Appendix II, Part B for any machines) with reference to the following standards
EN 13849-1 (performance level C)
MANUFACTURER'S DECLARATION (Directive 98/37 EEC Appendix II, Part B)
The product is designed for incorporation in a machine or to be assembled with other machinery, to construct a machine as envisaged
by the Directive 98/37 EEC and compliant with the standards EN 12453 and EN 12445.
It is also declared that it is not permitted to start up the product until the machine in which it is incorporated or of which it will be part has
been identified and accompanied by the declaration of conformity with the conditions as stated by the Directive 98/37 EEC and relative
national legislation, i.e. until the product referred to in this declaration forms a single complex with the final machine.
Conegliano, 01/06/2010
52

CE DECLARATION OF CONFORMITY

6) Aerial
7) Radio control
8) Flashing light
9) VEDO180 pair of photocells
10) Power line (230Vac)
Legal representative
Ennio Ambroso
Fig. 1