Power Switch; Steering Trim; Throttle Trim - Funtek DT12 NEO Mode D'emploi

TRANSMITTER SWITCH INSTRUCTIONS
A. Power Switch
When pairing for the first time,both the car and the transmitter have to be turned on within 3 seconds
to pair the frequency. Green LED on the transmitter will soild when pairing successful, at the same time
LED on the car will turn solid.
B. Steering Trim
When the chassis switch is turned on and the front tires are not straight,use the ST.TRIM to adjust the position.
• when the car oversteers to the left , ST.TRIM should be adjusted clockwise.
• when the car oversteers to the right , ST.TRIM should be adjusted anticlockwise.
C. Throttle trim
SUGGEST:Please adjust the TH.Trim to the low speed when you play with the car for the first time
to avoid damaging the car !
H
(High Speed)
- 5 -
L
(Low Speed)