Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Product operations
Reading LED indicators
The Charging LED is lighting orange when projector is being charged.
The Charging LED is lighting green when projector is fully charged.
Charging the battery
Connect one end of the supplied AC adapter to the DC IN
1
jack (mini USB type) of the projector and the other end to a
wall outlet.
The Charging LED turns orange and the charge starts.
2
When the charging is finished, the Charging LED will turn
3
from orange to green.
Powered off, charged by AC adapter
Powered on and charged by AC adapter
Powered off, charged by USB
Powered on, connecting with USB
Note:
When the charging is interrupted, the Charging LED will turn off.
Turning on/off your projector
Slide the Power switch to "On" position to turn on the projector.
To turn off the projector, slide the Power switch to "Off" position.
Note:
To avoid over heat, this projector will be turned off automatically after 4 hours continuous play.
If the projector gets no signal for longer than 3 minutes, it automatically shut down due to the
Auto-Off function to save power.
Adjusting the Focus
Please adjust the Focus switch to have a better view during
usage.
PORTABLE_PROJECTOR_MANUAL.indd 8
Charging status
Charging time
Around 3 hours.
Around 4 hours.
Around 6 hours.
No charging
3/24/10 4:34 PM
Publicité
Table des Matières
