Connections; Technical Data - Alpha IP MIOB 21001 Mode D'emploi

4.2 Connections

C D E
G H

4.3 Technical data

Short designation of the device
Supply voltage
Power consumption
Max. switching power, output 1
Max. switching power, output 2
Line type and line section
Protection type
Protection class
Ambient temperature
Dimensions (W x H x D)
Weight
Radio frequency
Receiver category
Typical radio range
Duty cycle
Guidelines
(C)
F
(D)
(E)
(F)
(G)
(H)
(I)
(J)
I
ALPHA-IP-MIOB
230 V / 50 Hz
max. 16 A
3680 W, cosφ ≥0.95 (potential-free)
1840 W, cosφ≥0,95 (potential-free)
solid and stranded cables
0.75 – 2.5 mm²
IP20
II
0 to 50°C
198.6 x 155.8 x 33.5 mm
365 g
868.3 MHz/869.525 MHz
SRD category 2
375 m
< 1 % per h/< 10 % per h
2014/53/EU Radio installations
2014/30/EU EMC
2011/65/EU RoHs
2014/35/EU Low-Voltage Directive
Connection terminals for PE (earthing conductor)
Connection terminals for N (neutral conductor)
Connection terminal block 5 (changeable: 2 =
closing contact / 1 = opening contact.
e. g. for the connection of recirculating
pump, air dehumidifier, CO pilot)
Connection terminals for IN1/IN2 (heating,
cooling or ECO operation, temperature
limiter or humidity sensor)
Connection terminals for L (external conductor)
Connection terminal 4 (e. g. for connection of
boiler, air dehumidifier, CO pilot)
Connection terminal for AOUT (0-10 V output)
LEDs for connection display: Pump (5.2), boiler
(4.2), status input 1 (IN1), status input 2 (IN2),
power supply (PWR) and change-over status
(C/O)
Connection terminal AOUT (I) is currently
without function.
Device overview
19