Wolf Power WCR6060FS Notice D'utilisation page 5

A
BURNER INJECTOR VALUES
ACCORDING TO THE GAS TYPE
Injector
Wok Burner
Power
Injector
Rapid Burner
Power
Injector
Semi-rapid Burner
Power
Injector
Auxiliary Burner
Power
Injector
Oven Burner
Power
Injector
Grill Burner
Power
Nozzle change operation:
1. Please use driver with special head
for removed and install nozzle as
figure-1
2. Please remove nozzle (figure-2)
from burner with special nozzle driver
and install new nozzle (figure-3)
Reduced Flame Gas Cock Adjustment:
In order to adjust your oven to the gas type, make the adjustment for reduced flame carefully by turning with a small
screwdriver as shown below on the screw in the middle of the gas cocks as well as nozzle changes.
Rapid Burner
Semi-rapid Burner
Auxiliary Burner
Wok Burner
Oven Burner
Grill Burner
For oven burners:
1. Please remove nut from on nozzle body with nut driver and disconnect gas pipe from body as Picture-6 and
Picture-7.
2. Please remove nozzle body and burner from cavity as Picture-8 and remove nozzle from injector body (picture-9)
and change. Than re-install nozzle body and burner on cavity by screws.
Figure – 6
LPG
G 30-30
mm 0.96
KW 3.60
mm
0.85
KW 3.00
mm 0.65
KW 1.78
mm 0.50
KW 0.88
mm 0.70
KW 2.16 / 2.22
mm 0.60 / 0.65
KW 2.22 / 1.72
Figure - 1
From LPG to Natural gas
3 turns anticlockwise
2.5 turns anticlockwise
2 turns anticlockwise
4 turns anticlockwise
4,5 turns anticlockwise
4 turns anticlockwise
Figure - 4
Figure – 7
6
Natural gas
G 20-20
1.30
3.35
1.15
2.77
0.97
1.78
0.72
0.99
0.97
1.83 / 2.00
0.95
1.78 / 1.85
Figure - 2
From Natural gas to LPG
3 turns clockwise
2.5 turns clockwise
2 turns clockwise
4 turns clockwise
4,5 turns clockwise
4 turns clockwise
Figure - 5
Natural gas
G 25-25
1.40
3.66
1.20
3.00
0.95
1.61
0.70
0.88
0.95
1.72 / 1.70
0.92 / 0.95
1.50 / 1.60
Figure - 3
Figure - 8