Marley Get Together Mode D'emploi page 2

Get Together
Portable Bluetooth
Greetings and Welcome to the House of Marley
We are honored you have selected Get Together to become part of your music experience. Get Together
is a portable stereo sound system which works with Bluetooth
hundreds of other devices via the auxiliary input. The system uses two high-output, long- throw 3.5"
(89mm) woofers in a ported enclosure, two 1" (25mm) tweeters and a powerful amplifier. The system
uses custom-milled bamboo front and rear sections and is wrapped in REWIND™ fabric composed of
reclaimed hemp, organic cotton, and recycled plastic bottles (RPET).
Everything You Need to Jam
The Get Together comes with the following items:
Powering Your Get Together
Get Together includes a built-in rechargeable battery that is charged by the included power supply. The
LED by the power port will glow RED when the system is charging and turn off once the battery is full.
Using a Wall Outlet
1. Insert the AC power supply cord into the Get Together.
2. Insert wall plug into an appropriate wall outlet.
Connecting Your Music Device(s)
Pairing Mode (Flashing Blue LED)
Get Together automatically goes into reconnect mode for 5 seconds as soon as
you turn it on (flashing BLUE led). It then switches to auxiliary mode (RED led).
You can pair a new device to Get Together by holding the
Note: Holding the
Get Together and go into Pairing Mode.
Connected Mode (Solid Blue LED)
Use your Bluetooth-enabled device to pair to Get Together. Get Together does not require a pairing
password. Once paired, the LED will glow solid blue.
Note: Get Together will automatically pair with the last device connected to it when turned ON (when
possible).
EN
Audio System
®
Sound System
for 3 seconds will kick off the device currently connected to
devices connected wirelessly and
®
AC Power Supply
(100-240 VAC)
for 3 seconds.
2
(1)
(2)