troubleshooting
CODE SYMBOL
MEANING
Water temperature control
HC
problem. (Heater control)
LC
Water level problem
OC
Water level sensor problem
The Water Level sensor is not
1C
working properly
bC2
Jammed button.
Communication error
AC
(SUB (sensor) PBA MAIN PBA)
Communication error
AC4
(WIFI PBA MAIN PBA)
Communication error
AC3
(DR Module MAIN PBA)
Communication error
AC5
(LCD PBA MAIN PBA)
Communication error
AC6
(Inverter PBA MAIN PBA)
8C
MEMS sensor problem.
SF
System error.
PC
Clutch Problem.
The washer has detected too many suds. The washer will stop operating until the
Sud
amount of suds has reduced. The washer will then resume normal operation.
Additional rinsing.
•
Ur
•
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG).
Show additional rinsing in
sensing unbalance.
Method of releasing the
display.
English - 36
SOLUTION
Call customer service.
Any key input.