Optional Rear Filler Kit - Samsung NE63 8 Serie Manuel D'installation

CAUTION
You must use the rear filler kit to install the range in a freestanding cutout cabinet.
For more information, see "Optional rear filler kit" as shown below.
NOTE
If you install the product in a kitchen island, you must maintain minimum 2-1/2"
from cutout to back edge of the countertop and minimum 3" from cutout to side
edges of the countertop.

Optional rear filler kit

Used to fill gap between the range back and wall. Adds a filler strip to the rear
of the range. This kit can only be used when the opening in the countertop is 25"
deep.
1. Unscrew the screws affixing the vent cover.
Install_NE63T8911_AA_DG68-01257A-00_EN.indd 5
2. Assemble the filler strip to the back of the range using the removed screws.
NOTE
If the countertop depth is greater than 25", there will be a gap between the filler
kit and the back wall.
English 5
3/19/2020 4:15:00 PM