Triopan Helios Blaze Mode D'emploi page 34

3. Operation
3.1 Activation
The lamp is delivered without batteries. Please insert the
correct batteries before operation in accordance with the
following instructions:
Insert batteries – 6 AA
batteries (standard retail)
3.2 Operation
1. Insert batteries  Lamp flashes automatically as function
check
2. Switch lamp off  Press the black setting pin for 2 seconds
then release ( using your finger, a pen or key)
3. Switch lamp on  Manually press the black setting pin or
simply place on the Triopan folding sign or accessory so
that there is contact.  Single flash!
4. Within a five-second period, the Triopan Helios Blaze can be
placed on the Triopan folding sign (or accessory) a second
time to create a contact a second time  Continuous light!
5. Switching off  After 5 seconds of operation, the Triopan
Helios Blaze can simply be removed. Alternatively, manual-
ly press the black setting pin for 2 seconds
General note: The user can switch the flashing of the Helios
Blaze on and off manually, independently of lighting conditions.
34
The Triopan Helios Blaze fits
on every Triopan folding sign:
No accessories required!