Samsung FlexDry DVE60A9900 Serie Manuel De L'utilisateur page 41

04 Start/Pause
05 Display
06 OK
07 Dryness
08 Temp.
09 Time
10 Options
11 Smart Control
(Electric models
only) / Smart
Monitor (Gas
models only)
Untitled-5 41
You can start or pause the operation.
• The upper button controls the upper dryer, and the lower button controls the
lower dryer.
• Tap and hold the button to start the operation.
• During the operation, tap the button to pause.
The display shows the current cycle, estimated time remaining, cycle options, and
other useful or alert messages.
Tap to confirm your selection of function or setting.
Tap to change the dry level for the selected cycle. You can select from level 1 to 5,
but available level depends on the selected cycle.
• 4 or 5: Suitable for large and thick items.
• 3: Standard drying level.
• 2: The Damp dry level is designed to partially dry items. Use for items that lay
flat or hang to dry.
• 1: Gently dries items to protect fabric. Suitable for delicate items or items you
want to naturally dry (by hanging or laying flat on drying rack) while they are
damp.
Temperature can only be adjusted in Time Dry cycle. Tap to change the
temperature of the current cycle.
Tap to select the cycle time for the following cycles. You can set the drying time
between 10 to 160 minutes, and available drying time depend on the selected
cycle.
• Upper Dryer: Blouses, Sweaters, Undergarments, Accessories.
• Lower Dryer: Small Load, Time Dry, Air Fluff, Wrinkle Away.
• Tap to enter the Options menu.
• Tap and hold for 3 seconds to enter the System Functions menu.
After connecting the dryer to your home network using the SmartThings app,
you can control or monitor the dryer remotely. When started, the Smart Control
(Smart Monitor) indicator turns on. The dryer enters waiting mode and waits for
remote commands.
English 41
2021-05-25 5:20:41