Samsung FlexDry DVE60A9900 Serie Manuel De L'utilisateur page 47

AntiStatic
Reduces static electricity that occurs from clothing friction. This is done by spraying steam in a later
stage of the drying cycle. The AntiStatic function is only available with Normal, Heavy Duty, Perm Press,
Delicates, and Time Dry. In the Normal, Heavy Duty, Delicates, and Perm Press cycles, you can use this
function if the dryness setting is 3 or higher.
1. Tap LOWER.
- This function is not available for the upper dryer.
2. Tap Options.
3. Turn the Navigation dial to select AntiStatic, and then tap OK.
4. Tap OK to select On or Off.
Eco Dry
With the Eco Dry activated, drying takes a longer time but power consumption is reduced.
This function is available with Normal and Time Dry.
1. Tap LOWER.
- This function is not available for the upper dryer.
2. Tap Options.
3. Turn the Navigation dial to select Eco Dry, and then tap OK.
4. Tap OK to select On or Off.
NOTE
The drying time can be extended by up to 3 times normal depending on the temperature and load. The Eco
Dry function is enabled by default.
My Cycles
Add or remove cycles to create a personal cycle list.
1. Tap UPPER or LOWER to select the upper or lower dryer.
2. Tap Options.
3. Turn the Navigation dial to select My Cycles, and then tap OK.
- You can only edit a cycle to create a personal cycle when the dryer is not operating.
4. Turn the Navigation dial to select a desired cycle.
5. Tap OK to add or remove the selected cycle.
- Addition and removal of a cycle is saved automatically.
6. Tap Options or select Back to finish My Cycles setting.
NOTE
The Normal (lower) and Blouses (upper) cycles cannot be removed from the cycles list.
Untitled-5 47
English 47
2021-05-25 5:20:42