Menu Functions; Start Menu - Dimas PP 455E Mode D'emploi

Operator's Manual PP 455E
8. Carefully increase the motor speed by turning the
control for motor rotation. A suitable working pressure
when cutting usually lies between 100 and 130 bar, but
varies depending on how many wheel sets are used in
the magazine, how much wire is in use and the
hardness of the material to be cut.
9. When material is cut away the working pressure can
drop, which is shown on the display, and the magazine
must be tensioned. Do this by turning the knob on the
pressure reduction block clockwise.
10.The output tension on the magazine is shown by an
indicator on the machine (shown in the min position).
When the magazine cylinder is fully tensioned, the
machine must be stopped and the wire must be wound
around a new wheel set. Then continue to cut as
above.
CAUTION
Always clean all the equipment at the end of
the working day.
Work procedure for wall sawing

Menu functions

The menus, shown on the display, are grouped in menus,
sub-menus ("Settings") and part menus. The menus are
divided into two sections:
• Start menu: Here you can select under which
conditions the hydraulic unit shall work.
• Operations menu: Information concerning the
operating status is shown here.

Start menu

The start menu is shown each time the power to the
hydraulic unit is switched on. The menu consists of three
steps:
DIMAS PP 455E Connect hose assembly
• Press OK when all hoses are connected. Step 2 is then
displayed.
Select fuse
The fuse rating must be set according to the fuse the
hydraulic unit is connected to.
Select 16 A, 32 A or 63 A
• Press OK to confirm the selection. Step three is then
displayed.
Select the output
The hydraulic output must be set depending on the
machine connected to the hydraulic unit. Select one of the
following options:
25 kW, 230 bar, 65 l/min (3300 psi, 17 US gpm)
15 kW, 210 bar, 45 l/min (3000 psi, 12 US gpm)
9 kW, 140 bar, 40 l/min (2000 psi, 10 US gpm)
• Press OK to confirm. The first step is then shown on
the operations menu.
English - 19