Samson AirLine 88 Serie Manuel Du Propriétaire page 9

Quick Start
It is recommended to use one of the included
foam or stainless steel windscreens when
using the AH8 headset. This will help reduce
breath or wind noise.
To attach the stainless steel windscreen,
line up the windscreen with the end of the
microphone capsule and push straight on
until it is securely affixed.
If you hear distortion at the desired volume level, check to see whether the PEAK Indicator LED
on the receiver is lighting RED. If it is not lit, make sure that the gain structure of your audio
system is set correctly (consult the owners manual of your mixer and/or amplifier for details). If
the PEAK Indicator on the receiver lights RED, it may be as simple as moving the microphone
further from your mouth.
If the level of the microphone needs further adjustment, press and hold the AH8 "+" or "–"
level buttons until the indicator starts flashing
indicating that the transmitter is in the Volume
Adjustment mode. Press the "+" button to raise
the level or the "–" button to lower the level. As
the level increases the indicator flashes faster.
When the level decreases the indicator flashes
slower. When the desired level is reached,
release the volume buttons. The AH8 will return
to normal operation after 10 seconds, and the
Status Indicator will be steady GREEN.
For best signal to noise performance, set the AH8
transmitter volume so that the PEAK indicator
on the CR88x receiver flashes occasionally when
speaking or singing with your loudest voice.
Multiple System Setup
When using multiple systems, each system must be set to a different operating channel. Transmitter
and receiver pairs must be on the same channel plan in order to work together.
When setting an additional transmitter, make sure to move all other transmitters away from the
CR88x receiver to prevent setting multiple transmitters to the same channel.
AirLine 88x Headset Wireless System 9