Technical Features; Maintenance And Cleaning; Extraordinary Maintenance - Genie Hand TLS Serie Mode D'emploi

TECHNICAL FEATURES

Power supply: 230V ± 10% 50Hz - protection against short circuit and overvoltage.
Power supply: 5V (battery version only uses 4 AA batteries 1.5V)
Dimensions (cm): L: 31 P: 20 H: 20 (Dimensions may vary)
Weight (Kg): 5-15 (Weight may vary)
Environmental conditions: 10 - 40 ° C, 30-90% humidity without condensation.

Maintenance and cleaning

Maintenance intended as repair work must only be carried out by the manufacturer.
The safe does not require any maintenance on the internal circuits.
All cleaning operations must be performed by removing the batteries and disconnecting the
safe from the power supply.
A clean and slightly damp cotton cloth is sufficient for the external cleaning of the container.
The surface is resistant to normal cleaning products, with the exception of aggressive solvents
(petrol, acetone, diluents in general, etc.).
For internal cleaning use a light blower or brush.

Extraordinary maintenance

Extraordinary maintenance is required in cases of breakdowns or breakages due to heavy
exploitation, unpredictable accidents or improper use of the device.
The situations that can be created from time to time are completely unpredictable and
therefore it is not possible to describe appropriate intervention procedures.
If necessary, consult the technical service to receive instructions appropriate to the situation.
All interventions, mechanical or electrical, ordinary or extraordinary, must in any case be
carried out by specialized personnel.
The environmental policy of Genie Hand S.R.L. limits the use of polluting materials (lead, solvents,
etc.) to the minimum necessary. According to current Community legislation, it is necessary to
dispose of the safe in accordance with the local regulations regarding the disposal of
mechanical, electrical and electronic waste. For no reason abandon the product in the
environment: this action can be prosecuted as a source of long-term pollution.
In case of further doubts about disposal, contact Genie Hand S.R.L.
In order to avoid the risk of electric shock and / or injuries, the instructions in the manual and
in the following notes must be followed carefully.
6
CAUTION
TO PROTECT THE INTEGRITY OF ALL THE COMPO-
NENTS OF THE DEVICE IT IS ESSENTIAL TO RESPECT
THE TECHNICAL DATA LISTED ON THE TARGET
The identi cation plate also shows the CE making.
DANGER
ACCESS TO THE CLOSED OR PROTECTED PARTS OF THE
SAFE MUST ONLY BE CARRIED OUT FOR MAINTENANCE
OPERATIONS AND ONLY BY AUTHORIZED PERSONNEL