Chauvet DJ D-Fi Hub Guide Rapide page 4

EN
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz. It
runs on 9 VDC, 500 mA.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Mounting
Before mounting this product, read the
Mounting Diagram
Threaded
mounting hole
size M12
Control Panel Description
Button Function
<MENU> Selects the menu or exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
<AUTO SYNC> Detects the D-Fi signal for synchronization of products
Menu Map
Main Level
Receive Manual
Transmit Manual
Settings
3
QUICK REFERENCE GUIDE
Safety Notes.
Mounting clamp
(e.g., CLP-15 from Chauvet)
Threaded
mounting hole
size M10
Hook and loop fastener strap
Programming Levels
CH01–16
CH01–16
Receive Auto
Transmit Auto
Keyhole mounting holes
Fastener strap loop
Description
Allows selection of a specific D-Fi channel
for receiving signal
Allows selection of a specific D-Fi channel
for transmitting signal
Triggers the D-Fi Hub to auto-select a
channel for receiving signal
Triggers the D-Fi Hub to auto-select a
channel for transmitting signal
D-Fi Hub QRG Rev. 3