Samson expedition XP800 Mode D'emploi page 12

Setting Up the XP800
Unpack all the system components from the shipping carton and save all packing mate-
rials in the event your unit ever needs to be returned for service.
Remove the mixer by turning the quarter turn screw counterclockwise towards the
RELEASE position.
LOCK
RELEASE
Remove the accessory compartment cover
by turning the quarter turn screw counter-
clockwise towards the RELEASE position,
and remove the included speaker cables.
Replace the accessory panel by aligning
the bottom of the panel with the slots.
Make sure the quarter turn screw is in the
RELEASE position; then close the panel
and turn the quarter turn screw clockwise
to LOCK.
12
Carefully hold the mixer to remove it from the speaker.