BUT SIGNATURE SCA194NFX Manuel D'utilisation page 44

9.Transfer the upper hinge part and make the upper
hinge axis into the upper hole of the door, and adjust
the position of the door (please support the door with
your hand when doing it), fixing the upper hinge part
with the special flange self-tapping screws.
10.Install the screw hole cover on the top right corner of
the refrigerator. Install the upper hinge cover (which
is in the plastic bag) on the left corner. Put the other
upper hinge cover into the plastic bag.
11. Move the handle from the left side of door to the
right side .
Warning!
When changing the side at which the door opens, the
appliance must not be connected to the mains.
Remove plug from the mains beforehand.
- 12 -