BUT SIGNATURE SCA194NFX Manuel D'utilisation page 41

Note: If required you may lay the refrigerator on its
back in order to gain access to the base, you should
rest it on soft foam packaging or similar material to
avoid damaging the backboard of the refrigerator. To
reverse the door, the following steps are generally
recommended.
1 . Use a putty knife or thin-blade screwdriver to prize
the screw hole cover which is at the top left corner of
the refrigerator, and the upper hinge cover which is at
the top right corner of the refrigerator.
2. Unscrew the special flange selftapping screws which
are used for fixing the right upper hinge part by a
8mm socket driver or a spanner (please support the
upper door with your hand when doing it) .
3. Remove the upper hinge axis, transfer it to reversed
side and tighten securely, then put it in a safe place.
- 9 -