Subsequent Use - Philips Lumea SC2001 Manuel D'utilisation

3 Apply one flash at the lowest recommended
intensity for your skin type.
4 As long as it feels comfortable (not painful),
increase the setting by one level within the
recommended range for your skin type and
apply one flash for each setting. Do not apply
more than one flash on the same spot.
5 After the skin test, wait for 24 hours and
check your skin for any reaction. If the skin
shows reactions, choose the highest setting
that did not result in any skin reaction for

subsequent use.

subsequent use
1 Before every treatment, clean the body
attachment, light exit window and
metallic frame of Philips Lumea for men.
2 Press the on/off button to switch on the
appliance.
, Intensity light 1 goes on automatically to indicate
that the appliance is switched on at default
intensity 1.
Note: It is normal that the appliance and the
attachment become warm during use.
3 Start each treatment by selecting the light
intensity very carefully, based on your skin's
sensitivity and on how comfortable the
treatment feels.
Your skin may react differently on different days/
occasions for a number of reasons. See section
'Possible side effects and skin reactions' in this
chapter for more information.
English
25