Water protection level
Water protection levels of appliance at different product zones are different. See the below
scheme:
Note:
The measured zone dimensions are limited by walls and fixed partitions. Above figure—
Zone dimensions of swimming pools and padding pools
Safety & announcements
• with protective conductors of all exposed conductive parts situated in these zones. 10.
The measures of protection by non-conducting location and by earth-free equipotent
bonding are not permitted. 11. Electrical equipment shall have at least the following
degrees of protection: 12. Junction boxes shall not be installed in Zones 0 and 1 except
in zone 1, where permitted for SELV circuits. 13. In Zone 0: IPX8 14. In Zone 1: IPX5
• In Zones 0 and 1, no switchgear and accessories shall be installed..
• The transformer must be located outside zone 1.
22