Remote Control - Velleman CARDVD3 Mode D'emploi

7. repeat 1: current track is playing repeatedly
repeat all: whole disc is playing repeatedly
8. volume setting

6. Remote Control

1. MENU: return to main menu (DVD)
2. PBC: playback control for VCD 2.0 format
3. DISPLAY: call on-screen display menu
4. POWER: switch the device on/off
5. Numeric keys: 1-9 + 0 + "10+"
6. PROGRAM: program the track playing order
7. SEARCH: jump to a particular chapter / point in time
8. TITLE: search for a particular title
9. VOCAL: select audio track on VCD
10. PLAY / Enter
11. SETUP: system set-up
12. : stop playback
13. : pause playback
14. / : previous / next track
15. RESUME: return to the previous screen
16. / : fast rewind / forward (VCD: 2x/4x ; DVD: 2x, 4x, 8x)
17. EJECT: no function
18. VOL +/-: adjust volume setting
19. MUTE: switch off all audio output
20. SUBTITLE: select or switch off subtitles
21. ANGLE: select camera angle
22. LANGUAGE: select a language (DVD)
23. Selection buttons ( , ,
24. ZOOM: enlarge the picture on the screen
25. 1-ALL: replay 1 track or all tracks
26. A-B: select point A and B & replay the part between them
27. SLOW: slow down playback (1/2 speed - 1/4 - 1/8 - full speed)
The CARDVD3 can receive the remote control signal if it's within an angle of 30° above, below, to the left or the right
of the point straight ahead of the sensor. The maximum distance is approximately 5 metres.
7. Connections
1. to the mains: connect the AC/DC adapter to the DC input (fig. 1 # 16) and insert it in the power outlet.
2. in the car: connect the adapter to the DC input (fig. 1 # 16) and insert the plug in the cigarette lighter.
3. to a TV set: power off both devices, connect the audio/video connections of the CARDVD3 (fig. 1 #11, 12 & 13) to
those of the TV set by means of the enclosed cable. Connect an S-Video cable if possible (fig. 1 # 14).
4. to an audio amplifier: power off both devices and connect the audio outputs of the CARDVD3 (fig. 1 #11 & 12) with
those of the amplifier. Make sure the colours match.
5. headphones: set the volume level of the CARDVD3 to a low level by means of the volume control (fig. 1 #19) and
connect the headphones to the connection (fig. 1 #18). Set the volume (fig. 1 #19) to your liking.
8. Operation
1. Make the appropriate connection before switching on the device.
2. Open the disc compartment by pressing the OPEN button (fig. 1 #10), insert a disc and press it down on the axis.
3. Close the disc compartment by closing the lid (fig. 1 #1).
CARDVD3
, )
3
Fig. 3
VELLEMAN