Overview; Technical Specifications; Instructions For Use - Flex WL LED 18.0 Mode D'emploi

18V-Leuchte.book Seite 8 Mittwoch, 29. Juli 2015 12:40 12
 If the battery is damaged or used
improperly, fumes may be emitted.
Provide fresh air and consult a doctor
if you feel unwell. The fumes may irritate
the respiratory tract.
 Recharge only with the charger specified
by the manufacturer. A charger that
is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
 Pointed objects, such as nails or screw-
drivers, or external forces may damage
the battery. This may cause an internal
short-circuit and the battery to burn,
smoke, explode or overheat.

Overview

1 Rotating and swivelling lamp head
2 On/Off switch
3 Handle
4 Slot for battery
5 Belt clip
6 Retractable lamp hook
8

Technical specifications

Device
Lithium-ion battery
Lighting duration 2,5 Ah
Lighting duration 5.0 Ah
Weight according
to "EPTA Procedure
01/2003" (without battery)
Protection class

Instructions for use

 Press charged battery fully into
the power tool.
 To remove the battery, press the release
buttons (1.) and pull out the battery (2.).
CAUTION!
When the device is not in use, protect the
battery contacts. Loose metal parts may
short-circuit the contacts; there is a risk
of explosion and fire!
WL LED 18.0
Workplace lamp
WL LED 18.0
V/Ah 18,0 /2,5 or
V/Ah 18,0/5,0
h ~ 20
h ~ 40
kg 0,33
III /