Symbols Used In This Manual; Symbols On The Power Tool; For Your Safety; Intended Use - Flex WL LED 18.0 Mode D'emploi

18V-Leuchte.book Seite 7 Mittwoch, 29. Juli 2015 12:40 12
WL LED 18.0
Contents

Symbols used in this manual . . . . . . . . . 7

For your safety . . . . . . . . . . . . . . . . . . . . 7

Overview . . . . . . . . . . . . . . . . . . . . . . . . . 8
Technical specifications . . . . . . . . . . . . . 8
Instructions for use . . . . . . . . . . . . . . . . . 8
Maintenance and care . . . . . . . . . . . . . . . 9
Disposal information . . . . . . . . . . . . . . . . 9
Exemption from liability . . . . . . . . . . . . . . 9
Symbols used in this manual
WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Disposal information
(See page 9)!
For your safety
WARNING!
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injuries. Save all warnings
and instructions for future reference.
Before using the power tool, please read
and follow:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
the currently valid site rules and the
-
regulations for the prevention of
accidents.

Intended use

The workplace lamp WL LED 18.0 is
designed
- for commercial use in industry and trade,
- for targeted illumination of the workplace.
The workplace lamp WL LED 18.0 is not
suitable
- for illuminating rooms,
- for use as a headlight.
Safety instructions for workplace
lamps
 Do not use the workplace lamp
in a potentially explosive environment.
 Do not point the light beam at people
or animals and do not look into the light
beam, even from far away.
 Do not cover the lamp head while
the workplace lamp is in use.
The lamp head heats up when in use and
the accumulating heat may cause burns.
 Do not use the workplace lamp
as a headlight.
 Before performing any work on the
workplace lamp (e.g. installation,
maintenance, etc.) or transporting
or storing it, take the battery out
of the workplace lamp.
 Do not let children use the workplace
lamp. It is designed for professional use.
Children may be accidentally blinded
or may blind others.
 Do not open the battery. There is a risk
of a short-circuit.
 Protect the battery from heat, e.g. from
continuous exposure to sunlight, fire,
water and humidity.
There is a risk of explosion.
7