After Usage - Qlima WDZ 510 Manuel D'utilisation

AUXILIARY POWER SOCKET WDZ530:
The WDZ530 is equipped with an auxiliary electrical power socket with a maximum electrical
power of 1800 W.

If your tool is equipped with a special dust outlet connection then the vacuum cleaner
hose can be connected to the dust outlet of your tool. In this way the dust will be captured
in the most efficient way.

The electrical power for the tool can be taken from the auxiliary electrical power outlet
see Picture 14.

Connect a tool (grinder, drill, etc) power cable to the WDZ530 auxiliary power socket.
Note
Maximum power of the connected tool: <1800 Watt (!).

Switch on the WDZ530: Press the on/off button to I or II. See afore mentioned chapter
3. "Usage".
DRAIN WDZ530:

WDZ530 is equipped with a drain. Picture P15

The drain prevents the heavy lifting of the WDZ530 for emptying.

Open the drain by turning the knob clock-wise. The water will now flow out!

When draining: ALWAYS make sure the water can float away to your preferred
place! Preferably ALWAYS drain outdoors.
Tip
When suction power is reduced: carefully tap on the lid or carefully tap
container to the floor to possibly remove the blockade.

4. AFTER USAGE:


Press the switch 5 to turn off vacuum cleaner.

Pull out plug.

Roll up the power cable.

Disassemble the hose D from the appliance.

Take the top cover 7 from the appliance.

Empty the container body 1 and wash it.

Use rag to dry container body 1.

Take out the filter A, B and/or C, and clean and wash it carefully (see P11)

Dry filter in air before installed on vacuum cleaner.
GB
25