Blowing Function; Floor Brush - Qlima WDZ 510 Manuel D'utilisation

Blowing function:

Put hose end into the blower outlet connection 14. The air will now blow through the
nozzle.
Note
Take care when using blower function. Dust and other residue are blown
away in an uncontrollable way!
3. USAGE:

Turn the machine on or off with on/off switch 5
WDZ 530 only:

WDZ530 has a special on/off I – 0 – II switch (see picture: P13)

Switch on the WDZ530: Press the on/off button to I or II.
o I = machine is ON, auxiliary electrical power socket is ON.
o 0 = vacuuming is OFF and power socket is ON
o II = Vacuuming is OFF and power socket is ON.
Usage all models:

When the container is full:
o Empty the container and clean it thoroughly

When it feels difficult to vacuum more dust, the filter needs to be taken out and cleaned.
See P11.

Control suction power by opening-closing the sliding button on the tube handle.

FLOOR BRUSH:

WDZ510/520: are equipped with the standard floor nozzle suitable for wet and dry
vacuuming
WDZ530: is equipped with the special QLIMA brush. See Picture 3b. The QLIMA brush
can be adopted for hard floor or for soft-/carpet floor by pressing the button on top of the
brush.
i. Switch on the tool: vacuuming automatically will start in 1
second
ii. Switch off the tool: the vacuuming will automatically stop
in 10 seconds
iii. Switch tool back on: vacuuming automatically will start in
1 second
iv. Switch off the tool again: the vacuuming will automatically
stop in 10 seconds
v. Etc etc
GB
24