Krups EA80 Serie Mode D'emploi page 17

CAUTION: Please read the safety instructions before using your appliance
Cleaning Fill tank
accessories
l
' '
l
: Light on
Sound signals:
One beep when pressing ON/OFF: turning on the power on the activated appliance.
One beep every ten seconds: the appliance is awaiting instructions from the user.
One double beep: the appliance has registered your request and will stop as soon as possible.
Lights
CLEAN CALC
l
l
l
l
l l
'
On / Off
l
The appliance is ready for a coffee or steam cycle.
Slow flashing: the appliance is in the preheating phase
or an initialisation cycle.
Double flash: a 2 coffee cycle is in process.
Empty the coffee grounds collector (a 2 coffee cycle is
underway).
Empty the coffee grounds collector + clean the coffee
l
drawer and wipe clean the area where the coffee
drawer sits + empty the drip tray.
Check coffee grounds collector is not missing or
incorrectly positioned. Check the coffee drawer is not
l
missing, wipe clean the area where the coffee drawer sits
and ensure the coffee drawer is correctly installed.
Fill tank with water. Check water tank is not missing or
l
incorrectly positioned.
Coffee cycle has stopped due to lack of water.
Fill tank with water.
Double coffee cycle has stopped due to lack of water.
Fill tank with water.
l
Cleaning program requested.
Cleaning program requested or in process.
Cleaning program: preparing cleaning or rinsing cycle.
l
Setting coffee temperature.
Scale removal program requested or in process.
Scale removal program: preparing scale removal or
l
rinsing cycle.
Rinsing cycle or scale removal cycle: request to empty
l
water tank, rinse it and fill with fresh water.
l
Long rinse request.
Long rinse in progress.
Constant flashing: operating fault.
Alternate flashing: Switching off of the appliance under
progress.
Meaning
: Light flashing
: Light double flashing
13