Troubleshooting Guide - legasy Lock-n-Load L1175L Instructions D'utilisation

Troubleshooting Guide

1. If air is not heard passing through auto bleeder when removing or installing barrel:
a. Slide Lock-n-Load™ switch and push the empty barrel (with follower rod unlocked) into gun head.
b. Pull follower rod and lock (clears the auto bleeder)
c. Disengage barrel from head (clears the auto bleeder)
d. Repeat until auto bleeder is cleared.
e. Contact Legacy Manufacturing
2. If when assembling the barrel to head seems difficult or springy:
a. Always push Lock-n-Load™ switch forward as far as possible.
b. Grease cartridge is not inserted completely into barrel.
c. Excess grease may be in head
- Remove excess grease.
d. Auto bleeder may be plugged
3. Grease does not flow when handle is stroked:
a. Release follower rod and push up if it doesn't automatically go up.
b. Grease cartridge may be empty.
c. See "Lock-n-Load Best Practices", "Priming after refilling with grease".
ONE YEAR LIMITED WARRANTY*
LEGACY MANUFACTURING COMPANY ("LEGACY") warrants that this equipment, ( NOT including couplers,
whip hoses, and wear items such as seals and springs ), will be free from defects in material and workmanship for a
period of one (1) year from the date of purchase, under normal use.* LEGACY'S sole obligation under this warranty is
limited to replacing or repairing, free of charge, any equipment that proves to be defective under normal conditions and
use according to the recommendations of LEGACY. To obtain repair or replacement, the equipment must be shipped to a
LEGACY authorized Warranty and Service Center during the warranty period, transportation charges prepaid, with proof
of date of purchase. In the event of repair or replacement, the warranty period shall not be extended beyond the original
warranty period.
This warranty is extended to the original purchaser only and is not transferable. This warranty does not apply to
normal wear items such as packings, seals, tips and filters, or to equipment damaged from accident, overload, abuse,
misuse, negligence, faulty installation or abrasive or corrosive materials, or to equipment repaired or altered by anyone not
authorized by LEGACY to repair and alter equipment. No allowance will be granted for any repairs or alterations made by
a purchaser without LEGACY'S prior written consent.
LEGACY WILL BEAR NO OTHER EXPENSE, INCLUDING BUT NOT LIMITED TO LABOR AND MATERIAL
COSTS (OTHER THAN THOSE SPECIFIED HEREIN) OF ANY KIND, AND YOUR EXCLUSIVE REMEDY, IN LIEU OF
ALL INCIDENTAL, SPECIAL, CONSEQUENTIAL OR ANY OTHER DAMAGES, INCLUDING, BUT NOT LIMITED TO,
DAMAGES FOR NEGLIGENCE, IS LIMITED TO REPAIR OR REPLACEMENT AS HERETOFORE DESCRIBED. THE
FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER REPRESENTATIONS OR WARRANTIES, EXPRESS OR
IMPLIED OF ANY KIND REGARDING ANY EQUIPMENT, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE. IN NO CASE SHALL
LEGACY BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF
WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER LEGAL THEORY.
Unless modified in a writing, signed by both parties, this Limited Warranty is understood to be the complete and
exclusive agreement between the parties, superseding all prior agreements, oral or written, and all other communications
between the parties relating to the subject matter of this Limited Warranty. Any action for breach of warranty must be
commenced within twelve (12) months following the end of the warranty period.
* If this equipment contains a hose, the hose is warranted for ninety (90) days only. The remaining portions of this
equipment are warranted for one (1) year, as described above. Contact us at service@legacymfg.com or legacymfg.com
for ordering and installation instructions.
Repair Part Repair Part Description
L2462 Automatic Air Bleed Valve
RP009006L Lock-n-Load™ Barrel & Assembly
RP009007L Lock-n-Load™ Barrel Switch Assembly
RP009135 Flexible Extension & 4 Jaw Coupler