Quick User Guide; Technical Data; Controls And Programmes - Hoover H3TFS Mode D'emploi

5. QUICK USER GUIDE

This washing machine automatically adjusts
the level of the water to the type and
quantity of washing. This system gives a
reduction in energy consumption and a
saving in washing times.
Program selection
l
Turn on the washing machine and select
the required program.
l
Adjust the washing
necessary and press the required "option"
buttons.
l
Press the START/PAUSE button to start
washing.
Should power go out when the washing
machine is running, a special memory
saves the settings and, when power
returns, the machine resumes the cycle
from where it left off.
l
At the end of the programme, the
message "End" will appear on the display
or, on some models, all wash stage
indicator lights will turn on.
Wait until the DOOR LOCKED light has
gone out before opening the door.
l
Turn off the washing machine.
For any type of wash, see the program
table and follow the operating sequence
as indicated.

Technical data

Water pressure:
min 0.05 Mpa / max 0.8 Mpa
(0.05 MPa dispenses approximately 1 litre
of water in 10 seconds)
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp /
Supply voltage: See rating plate.
6. CONTROLS AND
temperature if
A Programme selector with OFF
B START/PAUSE button
C DELAY START button
D OPTIONS button
E RAPID / STAIN LEVEL button
F TEMPERATURE SELECTION
G SPIN SPEED button
H ACTIVE STEAM button
H EASY IRON button
F+G KEY LOCK
I Digital display
L DOOR LOCKED indicator light
M ONE Fi EXTRA area
59
PROGRAMMES
L
I
F G H C
position
button
(only available on certain models)
(only available on certain models)
A
M
E D B