General Setup; Tv Display; Angle Mark; Screen Saver - LEXIBOOK THE AMAZING SPIDER-MAN DVDP1SP_02 Mode D'emploi

1. To enter the setting menus page, press the SETUP key.
2. Use the or keys to select a menu and press
3. Use the direction keys (
available options. Press
Note: Press on to go back to the list of menus.
4. To exit the setting menus page, select "Exit Setup Menu" and press
SETUP key at any time.
Press SETUP, and use the and keys to highlight "General Setup Page". Then press
or .

TV Display

1. Use the and keys to highlight "TV Display".
2. Press , then use the
• "4:3 Pan Scan": the sides of the image are cropped off to fit the proportions of a
standard 4:3 aspect ratio television screen.
• "4:3 Letterbox" : the film's original aspect ratio is preserved by reducing the vertical
height of the frame (black bars appear on the top and bottom areas of the screen).
• "16:9" : wide display format for widescreen televisions.
3. Press to confirm your selection.

Angle Mark

1. Use the and keys to highlight "Angle Mark".
2. Press , then use the
3. Press to confirm your selection. If the "Angle Mark" option is turned on, when
you press the ANGLE key during DVD playback, the OSD will display your selected
angle constantly. If the option is turned off, the OSD will display your selected angle
only for a few seconds.

Screen Saver

With this option, you can turn the screensaver on or off.
1. Use the and keys to highlight "Screen Saver".
2. Press , then use the
3. Press to confirm your selection.
Note: the screen saver default setting is "On".
Selecting the OSD language (OSD Language)
This option allows you to select the desired OSD language.
1. Use the and keys to highlight "OSD Language".
2. Press , then use the
3. Press to confirm your selection.
/ / / ) to navigate through the menus and to select the
to confirm your settings.
General Setup Page
and buttons to select "4:3 Pan Scan" / "4:3 letterbox" / "16:9".
and buttons to select "On" or "Off".
and buttons to select "On" or "Off".
and keys to select the desired on-screen display language.
or to confirm.
or press the
2