Safety Instructions - Meec tools 011210 Mode D'emploi

EN

SAFETY INSTRUCTIONS

WARNING!
Read all warnings, safety instructions and
other instructions carefully before use.
Failure to follow all the instructions and
safety instructions can result in the risk of
electric shock, fire and/or serious personal
injury. Save these instructions and safety
instructions for future reference.
• Always follow these instructions.
• Always follow local regulations for safety
at the workplace and prevention of
accidents. This product can be used by
children from 8 years of age and by
persons with physical, sensorial or mental
disabilities, or persons who lack
experience or knowledge, if they are
supervised or receive instructions
concerning the safe use of the product
and understand the risks involved.
• Do not allow children to clean or maintain
the product without supervision.
• The manufacturer cannot be held
responsible for any damage to, or caused
by, the product in the following situations.
– Incorrect/unsuitable use.
– Failure to follow these instructions.
– If repairs are carried out by
non-qualified personnel.
– If spare parts other than original
spare parts are used.
– If the product is used for anything
other than the purpose it is intended
for.
WARNING!
Do not allow children to play with the
packaging material – risk of suffocation.
18
SAFETY INSTRUCTIONS FOR
LITHIUM BATTERIES
• Do not open the battery – risk of short
circuiting.
• Do not expose batteries to moisture,
direct sunlight or heat – risk of explosion.
• If the battery is damaged or used
incorrectly it can emit gas. Ventilate the
area and seek medical attention if you
experience discomfort. Gas can irritate the
respiratory organs.
• Failure to handle the battery carefully can
cause fluid to leak from the battery. Avoid
contact with battery fluid. On contact with
battery fluid, rinse immediately with plenty
of fresh water. Seek medical attention on
contact with battery fluid. Fluid leaking from
the battery can cause irritation or burns.
• Only use original batteries from the
manufacturer, with the voltage specified
on the type plate on the power tool. The
use of non original batteries or
reconditioned batteries can result in a risk
of explosion and personal injury.
• Check that the rated voltage of the battery
corresponds to the rated voltage on the
type plate on the charger. The charging of
other batteries can cause a fire risk and/or
explosion.
• The battery must only be charged with the
charger recommended by the
manufacturer. A charger intended for one
type of battery can result in a fire risk if
used with another type of battery.
• Handle the battery with care – do not
expose it to knocks and blows, and protect
it from contact with nails, screwdrivers and
other sharp objects. Negligent handling
and sharp objects can cause short circuiting
in the battery, resulting in the emission of
fumes, overheating, fire or explosion.
• Stop charging and/or using the battery
immediately if it is damaged, deformed,
abnormally hot, smells, or exhibits other
unusual characteristics.
• Minor battery leakage can occur in
extreme operating conditions or hot