Climadiff TB5029 Notice D'utilisation page 15

 Place the foil cutter on the neck of the bottle.
 Hold firmly the bottle by its lower part and on the other the foil cutter. Make rotating movements in
order to cut the protection.
 Remove any part of the protection that would be on the top of the cork (in contact with the unit).
Corkscrew using
The corkscrew is operated by a one simple switch. The switch has two functions. Press the lower part of
the switch to remove a cork from a bottle. Press the upper part of the switch to release a cork from the
mechanism after you have removed it from the bottle.
Place the corkscrew on the top of the wine bottle. Ensure that it remains as upright as possible at all the
times.
Note: if you hold the corkscrew at an angle to the bottle, it will not remove the cork properly
1. Hold the corkscrew firmly and depress the lower part of the switch .The corkscrew spiral will turn in a
clockwise direction and enter the cork, then gradually remove it from the bottle. When the corkscrew
mechanism stops, the cork has been fully removed from the bottle.
2. Lift the corkscrew away from the bottle. To remove the cork from corkscrew, hold the corkscrew firmly
and depress the upper part of the switch. The spiral will turn in an anti-clockwise direction and release
the cork.
3. Always return the corkscrew to the wine base when you have finished with it. This will protect the
mechanism while it is not in use.
15