Humminbird HELIX 5 Serie Mode D'emploi
  1. Manuels
  2. Marques
  3. Humminbird Manuels
  4. Panneaux de contrôle
  5. HELIX 5 Série
  6. Mode d'emploi

Humminbird HELIX 5 Serie Mode D'emploi

Tableau de bord de la tête de commande
Masquer les pouces Voir aussi pour HELIX 5 Serie:
1
2
3
4
5
6
7
8
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Télécharger ce manuel
HELIX® 5 Series In-Dash Mounting Installation Guide
Installation Overview
Following are instructions for the in-dash mount installation of the HELIX 5 control head. We encourage you to
read this guide before starting the installation, so you may understand the installation requirements.
Technical Support: If you find that any items are missing from your installation kit, visit our Web site at
humminbird.com or call Humminbird® Technical Support at 1-800-633-1468.
Supplies: In addition to the hardware supplied with your accessory, you will need a drill and various drill bits,
a cutting tool for the dashboard material, safety glasses and dust mask, rubbing alcohol, and masking tape.
NOTE: The illustrations in this manual may not look the same as your product, but your product will function in the
same way.
1. Plan the Mounting Location
Start by locating a suitable, flat area of the dashboard for mounting. Consider the following to find the best
mounting location:
• Interference: The mounting location must provide adequate distance from electric motors or any equipment that
may cause electronic interference.
• Stability: The mounting area should be protected from waves, shock, vibration, and water.
• Depth: The mounting area should have a depth of 3 inches (7.62 cm) to allow space for the control head and
cables.
• Ventilation: The area beneath the mounting surface should be well-ventilated.
• Accessibility: The location should be easily accessible for all cables to reach the ports on the back of the
control head.
NOTE: If a cable is too short for your application, extension cables are available. For assistance, contact Humminbird
Technical Support at humminbird.com or call 1-800-633-1468.
4.28 in
(108.71 mm)
2. Cut the In-Dash Mounting Hole
To in-dash mount the HELIX control head, start by placing the components on the surfaces where you intend
to install them.
1. Review the instructions, measurements, and cutting options indicated on the In-dash Mounting
Template.
2. Tape the template to the chosen in-dash mounting location.
HELIX 5 Series In-Dash Mounting Dimensions
7.55 in (191.77 mm)
2.90 in (73.66 mm)
VIEW
MENU
EXIT
2.17 in (55.12 mm)
1
532319-2_A

Publicité

Table des Matières
loading

Manuels Connexes pour Humminbird HELIX 5 Serie

Sommaire des Matières pour Humminbird HELIX 5 Serie

  • Page 1 • Accessibility: The location should be easily accessible for all cables to reach the ports on the back of the control head. NOTE: If a cable is too short for your application, extension cables are available. For assistance, contact Humminbird Technical Support at humminbird.com or call 1-800-633-1468.
  • Page 2 532319-2_A HELIX® 5 Series In-Dash Mounting Installation Guide 3. Using the template, select the cutting method that is best for your boat: Installing the Gasket Confirm the gasket is evenly centered • Drill one entry hole away from the main cut line that is large enough to insert the blade of your cutting tool. around the rim of the control head.
  • Page 3 This warranty is effective for one year from the date confidently. We do it because you deserve the best. We will make every of original retail purchase. Humminbird products found to be defective effort to repair your unit within three business days from the receipt and covered by this warranty will be repaired or replaced free of charge of your unit at our factory.
  • Page 4 E-mail: service@humminbird.com unit. Telephone: 1-800-633-1468 NOTE: Please do not return your Humminbird to the store for service. Direct Shipping: Humminbird Please have your product model name and serial number available before Service Department calling the factory. If you contact the factory by e-mail, please include...

  • Page 5: Présentation De L'installation

    Nous vous invitons à lire la notice avant de commencer l’installation afin de prendre connaissance des exigences. Assistance technique : Si vous découvrez que des articles sont manquants dans votre trousse d’installation, rendez-vous sur notre site Web, humminbird.com, ou appelez le service d’assistance technique Humminbird® au 1-800-633-1468.

  • Page 6: Installation De La Tête De Commande

    532319-2_A Du Montage de Tableau de Bord de la Série HELIX® 5 3. En utilisant le gabarit, sélectionnez la méthode de découpage la mieux appropriée à votre bateau : Installation du joint d’étanchéité Vérifiez que le joint d’étanchéité est uniformémen •...

  • Page 7: Politique De Service Après-Vente De Humminbird

    à la discrétion de Humminbird, et renvoyés au client, fret payé jours ouvrables, à partir de la date de réception de l’appareil à notre à...

  • Page 8: Comment Renvoyer Votre Appareil Pour Réparation

    DEEE requiert que le producteur d’équipements électroniques grand public • Renvoyer le produit, fret payé à l’avance, à Humminbird. Assurer prenne en charge la gestion des déchets de leurs produits et mettent en oeuvre leur élimination en respectant l’environnement, pendant le cycle de vie du produit.

Table des Matières