Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALL TRANSMITTER BATTERIES
1.Remove the battery cover on the bottom of the transmitter (figure 6)
2.Install 3*1.5V AA batteries (not included) in correct polarities (Figure 7)
3.Close the battery cover (Figure 8)
NOTICE!
1. When installing batteries, please be sure to match the polarities
labeled on the battery holder.
2. Do not mix old and new batteries.
3. Do not mix different type of batteries.
TRANSMITTER INTRUCTIONS
A.Power Switch
B.Steering Trim
C:Throttle trim (low speed to high speed)
(1) Red LED
Green LED will flash when power is low on the
transmitter, please replace the batteries before continuing
1.Forward 2.Brake 3.Left
4.Right 5.Backward
PLAY TIME
15min
(2) Green LED
- 4 -
Figure 6
Figure 7
NEUTRAL
1
3
2
Figure 8
4
Publicité
Table des Matières
