D-Link DGE-530T Guide D'installation Rapide

Quick Install Guide
Gigabit Desktop PCI Adapter
Thank you for purchasing the Gigabit Desktop PCI Adapter. Follow the easy
steps in this guide to properly set up your adapter. Please verify that all the
package contents listed below are available.
Package Contents
DGE-530T Gigabit Desktop PCI Adapter
Low Profile Bracket
CD with drivers, software, and manual
If any of the above items are missing, please contact your reseller.
System Requirements
• A computer with an available 32-bit PCI bus master slot operating at 33MHz
• Windows 10, 8.1, 8, 7, Vista, Server 2000/2003/2008/2012, Linux 2.4.x and above,
or Mac OS 10.6 and above
• 512MB of RAM (1GB or more recommended)
• Intel Pentium 4 processor 2.0GHz (or equivalent) or faster
• CD-ROM Drive
DGE-530T
Installation
Note: Do NOT plug the adapter into your computer before installing the
drivers. Also, write down the serial number and hardware revision (e.g. D2)
before installing the adapter. If you contact technical support, you will need
this information.
Step 1 - Turn on your computer and Insert the D-Link DGE-530T Driver CD into
the CD-ROM drive.
If the CD Autorun function does not automatically start on your computer, go to
Start > Run. In the run command box type D:\autorun.exe (where D: represents
the drive letter of your CD-ROM drive). Drivers for non-Windows operating systems
are located on the D-Link CD.
Step 2 - When the autorun screen appears, click Install Driver. An Installation
Wizard will guide you through the process, no matter which operating system
you are running. This process will install drivers and software.
Step 3 - Once the installation is complete, click OK to finish.
Step 4 - Install the DGE-530T into your computer.
a. Shut down the computer, unplug its power cord, and remove
the chassis cover. Note that opening the case of your computer
may compromise the warranty of your computer. Consult the
computer manufacturer before opening the case to ensure that
you adhere to warranty guidelines.
b. Insert the contact edge of the DGE-530T card into the connector
of any available PCI Bus Master expansion slot. Press the card
firmly into the connector such that the card's contacts are fully
seated in the connector.
c. Install the bracket screw that secures the card to the computer
chassis.
d. Replace the computer's chassis cover. Connect an Ethernet cable
from the adapter to your router, switch or Ethernet device.
Step 5 - Plug in the power cable, and power on your computer. Once you boot
your computer, Windows will automatically install the drivers.
®
Windows 10/8/7/Vista users: You will receive a pop-up window
® ®
stating Windows has finished installing the DGE-530T adapter.
Step 6 - Please refer to the user manual on the supplied CD-ROM for more
information on configuring your adapter and advanced features.
Technical Support
Having trouble installing your new product? D-Link's website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website.
United States Canada
Internet: http://support.dlink.com Internet: http://support.dlink.ca
©2017 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the
property of their respective owners. Product specifications, size and shape are subject to change without notice, and actual product
appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.
Version 4.10(NA)_128x188 | Feb 14, 2017 5302760