Publicité
Les langues disponibles
Les langues disponibles
.1. Attach Wall Mount (Item #17 in Figure 12) to wood stud
as shown below.
2. Slide Wall Bracket L (Item #25*) and Wall Bracket
R (Item #26*) on Large Base (Item #23*) onto Wall
Mount. (Figure 13)
* Figure 12
© 2015, Pinnacle Products International, Inc.
Wall Mount (Item #17)
Figure 12: Wall Mount installation Close Up
Handle Arm (Item #20)
Figure 13: Wall Mount installation
The installer MUST be
WARNING
certain that the support bracket is
mounted to a minimum of a 2x4" stud, and that it
is able to support 105 pounds continuously.
-Flat head Screw Driver.
2"x4"
STUD
Large Base
(Item #23)
Wall Mount
(Item #17)
13
Wall
Publicité
