Installation; Operation - Master MAC-36-BDF Manuel De L'utilisateur Et Instructions D'utilisation

Simply locate fan in safe, desired position on level ground, fold out wheels, and connect to approved power source.
NOTE:
figure 1: Wheel Assembly
NOTE:
TO START FAN:
1. Be sure the Power Switch is in the (OFF) position.
2. Connect to an approved power source.
3. Make sure area is clear from all obstructions.
4. Push Power Switch to the LOW position and allow to
operate for 10 seconds.
5. Once 10 seconds have passed, you may now push the
Power Switch to the HIGH position.
© 2015, Pinnacle Products International, Inc.

Installation

Swing out wheels
US Patent # 7413199

Operation

Swing UP to lock
TO TURN OFF FAN:
1. To turn off the fan, simply return Power Switch to the
middle (OFF) position.
NOTE:
Do not operate any fan with a
WARNING
damaged cord or plug. Discard
fan or return to an authorized service facility for
examination and/or repair. Do not run cord under
carpeting. Do not cover cord with throw rugs , runner,
or similar coverings. Do not route cord under furniture
or appliances. Arrange cord away from traffic areas
and where it will not be tripped over.
3
Portable Air Circulator User's Manual
NEVER LEAVE A FAN
SOURCE