Initial Use; Assembling The Light; Switching The Light On/Off/ Dimming; Replacing The Bulb - lidl LIVARNOLUX Instructions D'utilisation Et Consignes De Sécurité

... / Initial use / Replacing the bulb / Maintenance and Cleaning / Disposal
Safe working
Position the lamp so it is protected from moisture
and dirt.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Do not cover the lamp with objects. Excessive
heat can result in fire.
Do not look into the illuminant from a close dis-
tance during operation.
Do not use optical instruments to look at the il-
luminant.

Initial use

Assembling the light

Loosen the threaded ring
retaining ring from the lamp socket
2
Place the glass shade
and fasten with the threaded ring
4
the retaining ring
2
Be sure it is correctly positioned.
Screw the illuminant
lamp socket (see Fig. B).
4
Plug the mains plug
stalled socket.
Your light is now ready to use.
Switching the light on/off/
dimming
Note: The light has three dimmer settings.
Touch the lamp base
or off (see Fig. B).
Touch the lamp base
lect the desired brightness (see Fig. B).

Replacing the bulb

CAUTION! RISK OF ELECTRIC SHOCK!
First unplug the mains plug
26 GB
and remove the
1
.
4
over the lamp socket
3
and
1
(see Fig. A).
clockwise into the
6
into a properly in-
5
to switch the light on
7
multiple times to se-
7
from the socket.
5
CAUTION! DANGER OF BURN INJURIES!
Allow the lamp to cool down completely.
Use a clean, lint-free, dry cloth when replacing
the illuminant .
6
Unscrew the defective illuminant
lamp socket , turning counter-clockwise.
4
Screw a new illuminant, E14 max. 42 W, clock-
wise into the lamp socket
Plug the mains plug
stalled socket.
Your light is now ready to use.

Maintenance and Cleaning

CAUTION! RISK OF ELECTRIC SHOCK!
First remove the mains plug from the socket.
CAUTION! DANGER OF BURN INJURIES!
Allow the lamp to cool down completely.
CAUTION! RISK OF ELECTRIC SHOCK!
For electrical safety, never clean the light with
water or other liquids, or immerse it in water.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Unplug the mains plug
Only use a dry, lint-free cloth for cleaning.
Plug the mains plug
stalled socket.
Disposal
The package and packaging materials
consist entirely of environmentally friendly
materials. They can be disposed of at
your local recycling facility.
The symbol of the wheelie bin with the
line through it means that, in the European
Union, the product has to be disposed
of in a separate refuse collection. This applies to the
product and to all components bearing this symbol.
Do not dispose of products bearing this symbol in
your normal household waste, but instead they must
be taken for recycling to a collection site for
from the
6
.
4
into a properly in-
5
from the socket.
5
into a properly in-
5