In Car Installation - Salora DVP7748DUO Mode D'emploi

In Car Installation

Preparation
1.Remove the mounting kit and the DVD player from the seat when the DVD players
are not in use.
2.Take out all accessories including car mount kit from the car when the units are not in use.
To use the player in a car, attach the main unit and the second screen to the back of t h e front
seat headrests.
A
B C D
1.Fix the headrest mount bracket on to the front seat headrest
A:Position the bracket on the bars of the headrest.
B:Fasten t he screw to fix the bracket firmly on the cars.
Note: There are 4 short screws for fixing the
longer screws for 14mm metal bars.
2.Fix the DVD mount bracket to the portable DVD player .
N ote: there are three holes on the bracket. Use any one as you like.
A. DVD player fastening screw node
B. Viewing angle adjustment node
C. Buckle release button
D. Headrest mount bracket
bracket on the 11mm metal bars, other 4
4
3.Aim the sc rew of the b racket t o the scre w nut on th e back of the DV D player.
S c r e w tight the bracket onto the DVD player.
4.Install the DVD player to the headrest.
Buckle DVD bracket into the headrest mount bracket.
5.Adjust the viewing angle
Release the node.
Adjust the viewing angle as desired.
Fasten the node.
6.Press the release button to release the DVD player from headrest.
To attach the second screen, repeat the above steps.
5